SNR R164.18 wheel bearings

Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Basic Static Radial Load Rating Co:156000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; d:80.000 mm; Grease Speed Rating n1:2400 rpm; Basic Dynamic Radial Load Rating C:182000 N; Accessories:Two Shields & Snap-R; B:68.30 mm;

Grease:5 600 min-1; D:120 mm; Static (Cor):44.700 kN; Oil:6 700 min-1; Weight:1.38 kg; Da:110 max; d:55 mm; B:29 mm; Pu:2.032 kN; Bearing designation:6311  ;

Fillet Radius ra:1.00 mm; d:50.000 mm; Basic Dynamic Radial Load Rating C:60500 N; D:90.0000 mm; Oil Speed Rating n2:19000 rpm; B:40.00 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating n1:13000 rpm;

Appropriate attachment bolt, rec. tightening torque:2280 N·m; Oil level, min.:72 mm; Cap bolt, rec. tightening torque:400 N·m; N:50 mm; P55°:4700 kN; Q180°:1430 kN; P0°:3800 kN; Mass housing:221 kg; H:516 mm; P180°:1900 kN;

Pu:23.300 kN; Static (Cor):58.610 kN; B1:mm; rs Dynamic (Cr):2 mm; Grease:0.940 kN; Oil:3 800 min-1; D:160 mm; d:90 mm; with tapered bore:1218  ; B:30 mm;

A1:203.2 mm; H:419.1 mm; Cap bolt:1 1/4-7 UNC; Ca:107.798 mm; da:182.563 mm; Stabilizing ring:SR-40-34; Bearing:22240 CCK/W33; End plug (suffix Y):EPR 21; S:4.763 mm; P60°:557 kN;

End plug (suffix Y):EPR 5; RG:1/4 NPT; H1:82.55 mm; ba:36.513 mm; R1:44.45 mm; L:279.4 mm; Taconite seal:TER 23; P150°:14.7 kN; Max. speed for Taconite seal:1575 r/min; Adapter sleeve assembly:SNW 111x1.7/8;

Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; B:25.40 mm; Basic Dynamic Radial Load Rating C:22500 N; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; Grease Speed Rating n1:8500 rpm; Basic Static Radial Load Rating Co:14600 N; d:20.000 mm; Accessories:No Shield, no Seal;

r1,2 min.:4 mm; Fatigue load limit Pu:190 kN; Basic dynamic load rating C:1560 kN; D1 ≈:285 mm; K:7.5 mm; D:320 mm; Calculation factor Y0:2; B:112 mm; Da max.:303 mm; Limiting speed:360 r/min;

L:869.95 mm; Mass pillow block:351 kg; Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:1017 N·m; ba:103.188 mm; Initial grease fill:3515.4 g; H:495.3 mm; Ca:147.803 mm; N1:41.275 mm; P60°:449 kN;

B2:43 mm; Mass angle ring:10 kg; d:420 mm; B1:23 mm; r3,4 min.:5 mm; d1 ≈:490 mm;

Housing:SAFS 040 KA; Eye bolt:2 x 3/8-16 UNC; PG:1/4 NPT; Taconite seal:TER 158; Ca:95.809 mm; J max.:549.275 mm; P120°:127 kN; RG:3/4 NPT; End plug (suffix Y):EPR 21; Cap bolt recommended tightening torque:1220 N·m;

B:62.00 mm; D:110.0000 mm; Grease or Oil Speed Rating n1:3600 rpm; Basic Dynamic Radial Load Rating:43600 N; d:50.000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:14000 N; Width C:27 mm;

D2 ≈:82.2 mm; Fatigue load limit Pu:0.98 kN; Mass bearing:0.45 kg; d2 ≈:58.884 mm; Calculation factor f0:14.4; Basic dynamic load rating C:37.1 kN; da max.:58.5 mm; D:90 mm; ra max.:1 mm; Basic static load rating C0:23.2 kN;

Grease Speed Rating Open/Shielded n1:4000 rpm; Oil Speed Rating Open/Shielded n2:4800 rpm; Fillet Radius ra:2.00 mm; d:105.000 mm; Accessories:Two Shields & Snap-R; D:160.0000 mm; Basic Dynamic Radial Load Rating C:79300 N; Sealed Speed Rating n3:2400 rpm; Basic Static Radial Load Rating Co:65500 N;